By March 19, 2013 Read More →

The new SRT Viper TA is the lightest vehicle in the Viper lineup

SRT Viper TA 2014_01The new 2014 SRT Viper TA package builds upon the legendary on-track capability of the American hand-built supercar using a majority of pre-developed components straight from the SRT stable, that are combined into a carefully balanced package that extract the most out of the Viper ultralow center of gravity, 50/50 weight distribution and largest contact patch in the production car world.

The suspension on the 2014 SRT Viper TA is uniquely tuned and upgraded specifically for on-track usage and to maximize the performance of the Pirelli P Zero Corsa tires which are mounted on ultra-lightweight, multi-spoke Sidewinder II wheels. A two-mode Bilstein Damptronic suspension system features firmer levels of damping and a smaller spread between modes than what is found on the current Viper GTS models.

SRT Viper TA 2014_02Shock dampers, springs and road racing derived stabilizer bars have been retuned for optimal on-track performance. The standard aluminum structural X-brace is replaced with a lighter carbon fiber brace that effectively ties the four corners of the engine compartment together and contributes to the 50-percent increase in torsional rigidity and stiffness across the Viper lineup.

Based on the outstanding performance of the world-class brake system on the 2013 SRT Viper, SRT engineers are working in parallel with Brembo on a system that increases thermal capacity and optimizes heat dissipation providing improved extreme use. The brake calipers on the 2014 SRT Viper TA feature a black anodized finish with the Viper logo shown in Crusher Orange.

The unmistakable exterior of the SRT Viper TA features exclusive Crusher Orange paint with black 2D TA logos behind both front wheels, black Stryker logo on the front fascia and matte black, ultra-lightweight Sidewinder II wheels. Exterior aerodynamics package includes carbon fiber front splitters and rear spoiler, while a carbon fiber rear applique accentuates the rear width proportions and adds another level of detail.

Inside, the performance driver-oriented cabin of the 2014 SRT Viper TA uses the same standard premium ballistic fabric racing seats from Sabelt, featuring a lightweight fiberglass shell created by a state-of-the-art resin transfer molding technology for mass reduction and long-term durability. Both driver and passenger seats can also accommodate a 3- or 6-point harness for racing belts.

SRT Viper TA 2014_03The standard black interior combination includes unique Crusher Orange accent stitching on the cloth seats, instrument panel (through the cowl), center stack, console, pull brake, shifter boot, shifter head, steering wheel and upper doors.

Under the hood of the 2014 SRT Viper TA is the handcrafted, all-aluminum 8.4-liter, mid-front V10 overhead-valve engine. Performance ratings are 640 horsepower and 600 lb.-ft. of torque – the most torque of any naturally aspirated sports-car engine in the world. Curb weight is an estimated 3,348 pounds.

Only 33 units of the 2014 SRT Viper TA in Crusher Orange will be built at the Conner Avenue Assembly Plant in Detroit, beginning in third quarter 2013.

 

Category: Car News
Tags: ,