Posts Tagged: supercharger

ProCharger i-1 for Camaros
By July 10, 2014 Read More →

ProCharger i-1 for Camaros

ProCharger i-1 Programmable Ratio Intercooled Supercharger Systems for 2010–2013 SS Camaro’s add 215+ HP to stock LS3’s and support up to 900 HP. With an intelligent control system and optional touch screen display, drivers can switch between 3 factory supplied performance modes, as well as a custom mode.

Edelbrock E-Force Supercharger system for MY2009 5.7 HEMI engine
By May 9, 2012 Read More →

Edelbrock E-Force Supercharger system for MY2009 5.7 HEMI engine

Edelbrock released their E-Force Supercharger system for 2009-10 Challenger, Charger and 300C equipped with a 5.7L HEMI engine. This design is engineered and manufactured by Edelbrock and features an Eaton Twin Vortices Series (TVS) 2300 GEN VI rotor assembly – the same internals used on the Corvette ZR-1. This system increases the performance of the stock engine, from 360 horsepower and 390 ft-lbs. of torque (as measured at the flywheel) to 506 horsepower and 501 ft-lbs. of torque.

Edelbrock supercharger system for HEMI
By September 18, 2011 Read More →

Edelbrock supercharger system for HEMI

If your HEMI equipped Challenger, Charger, Magnum or 300 needs more power, the answer could be an an Edelbrock E-Force Supercharger system. These complete supercharger systems provide maximum flow, minimum temperature rise, quiet operation and reliability. They feature minimum air restriction in and out of the supercharger for optimal flow. They also include individual 7″ […]

Edelbrock unleashed E-Force Supercharger system for 2011 5.0L Ford Mustang GT
By April 2, 2011 Read More →

Edelbrock unleashed E-Force Supercharger system for 2011 5.0L Ford Mustang GT

Edelbrock announced the release of their E-Force Supercharger system for 2011 Ford Mustangs equipped with a 5.0L 4V engine. Based in large part on the existing supercharger for 2005-10 Mustangs, this new kit will allow the 2011 Mustang to produce 559 horsepower and 503 ft-lbs. of torque with low boost. This design is engineered and […]

Weiand vintage blower driver
By March 31, 2011 Read More →

Weiand vintage blower driver

Weiand has announced the release of its vintage “swing-arm” style blower drive for their 6-71 series Supercharger system. This drive style gained notoriety as the standard choice for front engine dragsters, gassers, and altered of the 1960’s as well as on Mel Gibson’s Interceptor Coupe during the 1970’s cult classic movie Mad Max. The drive […]

Category: Tuning News
Tags: ,
Lingenfelter superchargers for GM SUVs
By May 20, 2010 Read More →

Lingenfelter superchargers for GM SUVs

Lingenfelter offers an exciting upgrade package that features Magnuson’s TVS1900 supercharger system for all of the popular General Motors based SUV & truck applications. Installed systems are available for most 6.0 L, 6.2 L engine powered vehicles including the Avalanche, Trailblazer SS, Suburban, Denali XL, Yukon Denali, Sierra pickup, Cadillac Escalade & Hummer H2. The […]

Edelbrock E-Force Supercharger for C6 Corvette
By February 24, 2010 Read More →

Edelbrock E-Force Supercharger for C6 Corvette

Edelbrock has released their new E-Force Supercharger kits for the C6 Corvette. The all new design pushes the stock LS3 engine up to an amazing 554 flywheel HP and 515 ft/lbs of torque (with stock fuel pump) or 599 flywheel HP and 547 ft/lbs of torque (with included high volume fuel pump). This supercharger incorporates the Eaton Twin Vortices Series (TVS) Gen VI rotor assembly, the same internals used on the new ZR-1 Corvette, as well as an air to water twin intercooler system and dual core heat exchanger. Torque has been optimized through the use of 12″ long runners, while low speed fuel economy is retained through the use of an internal bypass valve to reduce parasitic loss. All of this technology fits under the stock hood without modification to the hood, hood liner or cowl.